Click image to view full size image
WD1611
1. Allow only one-way rotation either
Clockwise or counterclockwise, and
The direction is set during fabrication.
2. The rotation interval is 120 degree.
3. Machanical key switch is used to
Lock/unclock rotation direction.
4. Electronic control board can connect
Any access control device with dry
Contact interface.
5. Power supply: AC220V, 50HZ
6. Operation environment:
-15 degree-+60 degree, RH: Less than 95 percent
7. Dimensions are 2185mm high,
1525mm wide and 1270mm deep.
8. Two type material finished:
A. WD1611-P, all steel components
Are hot-dipped galvanized and all
Surfaces are powder coated to grey
White color.
B. WD1611-S, all steel componets are
Stainless steel.
Full High Turnstile (WD1611)
